Garmin GPSMAP 5215 - Manual (Page 75)

GPSMAP ® 4000/5000 Series Owner’s Manual 71
Radar
Adjusting the VRM and the EBL
You must show the VRM and the EBL before you can adjust them ( page 70 ).
You can adjust the diameter of the VRM and the angle of the EBL, which moves the intersection point of the
VRM and the EBL. The VRM and the EBL configured for one mode are applied to all other radar modes.
1. From the Home screen, select Radar.
2. Select Cruising, Harbor, offshore, or Dual Range.
3. Complete an action:
• Select Menu > Adjust VRM/eBL > Move VRM/eBL for Cruising, Harbor, or Offshore Mode.
• Configure the setting for the short-range screen in Dual Range mode. Select
> Menu > Adjust
VRM/eBL > Move VRM/eBL for the GPSMAP 4000 series. Select Left > Adjust VRM/eBL >
Move VRM/eBL for the GPSMAP 5000 series.
• Configure the setting for the long-range screen in Dual Range mode. Select > Menu > Adjust
VRM/eBL > Move VRM/eBL for the GPSMAP 4000 series. Select Right > Adjust VRM/eBL >
Move VRM/eBL for the GPSMAP 5000 series.
4. Select a new location for the intersection point of the VRM and the EBL.
5. Select Done.
Measuring the Range and Bearing to a Target Object
You must show the VRM and the EBL before you can adjust them ( page 70 ).
The VRM and the EBL configured for one mode are applied to all other radar modes.
1. From the Home screen, select Radar.
2. Select Cruising, Harbor, offshore, or Dual Range.
3. Complete an action:
• Select Menu > Adjust VRM/eBL > Move VRM/eBL for Cruising, Harbor, or Offshore Mode.
• Configure the setting for the short-range screen in Dual Range mode. Select
> Menu > Adjust
VRM/eBL > Move VRM/eBL for the GPSMAP 4000 series. Select Left > Adjust VRM/eBL >
Move VRM/eBL for the GPSMAP 5000 series.
• Configure the setting for the long-range screen in Dual Range mode. Select > Menu > Adjust
VRM/eBL > Move VRM/eBL for the GPSMAP 4000 series. Select Right > Adjust VRM/eBL >
Move VRM/eBL for the GPSMAP 5000 series.
4. Complete an action:
• For the GPSMAP 4000 series, use the Rocker to adjust the diameter of the VRM and the angle of the
EBL, so that the intersection point of the VRM and EBL is at the target location
• For the GPSMAP 5000 series, touch the target location.
The range and the bearing to the target location appear in the upper-left corner of the screen.
5. Select Done.
Displaying the Distance to a Point on the Radar Screen
You can select a point on the radar screen to display the distance and bearing of that location from your present
location in the upper-left corner of the screen.
1. From the Home screen, select Radar.
2. Select Cruising, Harbor, offshore, or Dual Range.
3. Select the desired location on the radar screen.
The distance and bearing to the selected location is displayed in the upper-left corner of the screen.
4. Select Stop Pointing.