Garmin GPSMAP 5215 - Manual (Page 89)

GPSMAP ® 4000/5000 Series Owner’s Manual 85
Radar
Radar Overlay Navigation Display Settings
Changing the Map Zoom Detail
You can adjust the amount of detail shown on the map, at different zoom levels, for the Radar Overlay.
1. From the Home screen, select Charts > Radar overlay > Menu > Setup > Chart Setup > Detail.
2. Select a level of detail.
Showing and Configuring the Heading Line
The heading line is an extension drawn on the map from the bow of the boat in the direction of travel. You can
configure the appearance of the heading line on the Radar Overlay.
1. From the Home screen, select Charts > Radar overlay > Menu > Setup > Chart Setup > Heading Line.
2. Complete an action:
• Select Distance > Change Distance to set the distance to the end of the heading line. Enter the
distance.
• Select time > Change time to set the amount of time until you reach the end of the heading line.
Enter the time.
3. Select Done.
Showing an Inset Map while Panning
You can control whether an inset map appears while panning the Radar Overlay.
1. From the Home screen, select Charts > Radar overlay > Menu > Setup > Chart Setup > inset Map.
2. Complete an action:
• Select on to show an inset map at all times.
• Select Auto to show an inset map only when the position icon (
) is no longer visible on the screen.
Showing and Configuring Spot Depth Soundings
On the Radar Overlay, you can turn on spot soundings and set a dangerous depth.
1. From the Home screen, select Charts > Radar overlay > Menu > Setup > Chart Setup > Spot Depths >
on.
2. Select Spot Depths > Dangerous.
3. Enter the dangerous depth.
4. Select Done.
Showing and Configuring Navaid Symbols
You can show and configure the appearance of navaid symbols on the Radar Overlay.
1. From the Home screen, select Charts > Radar overlay > Menu > Setup > Chart Setup > Symbols.
2. Complete an action:
• Select Navaid Size to set the size of the navaid symbols shown on the map. Select a size.
• Select Navaid type > NoAA to show the NOAA navaid symbol set on the map.
• Select Navaid type > iALA to show the IALA navaid symbol set on the map.