Garmin StreetPilot III - Manual (Page 59)

57
• Non-Skid Portable Friction Mount
No installation required.
• Handheld/Portable Antenna (replacement)
This is a replacement part for the StreetPilot III’s antenna, should the latter break or become lost.
• AC Adapter
Allows you to operate the StreetPilot III using standard AC house current.
• PC Interface Cable with Cigarette Lighter Adapter
Allows you to connect the StreetPilot III to a vehicle’s electrical system on one end, and a PC, beacon
receiver, marine autopilot or other compatible device on the other.
• PC Interface Cable
RS-232 serial port connector.
• USB Data Card Programmer
Programs data cards at high speeds through a computer.
• USB to RS-232 Converter Cable
Allows an RS-232 interface cable to be connected to any USB port on a PC.
• Power/Data Cable with Bare Wire Leads
Allows the StreetPilot III to be hard-wired to the vehicle’s electrical system, and connected to a PC,
beacon receiver, marine autopilot or other compatible device (see page 55).
• Carrying Case
With storage for data cartridges.
• StreetPilot III Training Video
Guides you through the use of your StreetPilot III the fast and easy way.
Appendix C
Optional Accessories
Handheld/Portable Antenna
Carrying Case
USB Data Card Programmer
190-00256-10_0B.indd 57 1/13/2003, 10:34:24 AM