Navigation page – Garmin GPSMAP 130 User Manual

Page 40

Advertising
background image

GPSMAP 130 Navigation Page

Whenever a GOTO, MOB, TracBack or route has been activated, the GPSMAP

130 will provide digital and graphic steering guidance to the destination with the
navigation page. The top half of the nav page features four user-selectable data
fields that display the bearing (BRG) and distance (DIS) to waypoint, along with
your current course (COG) and speed over ground (SOG). In addition, there’s a
moving compass tape to indicate the direction you’re heading. Two additional data
fields at the bottom of the page show the estimated time enroute (ETE) and veloc-
ity made good (VMG) to your destination.

The middle section of the screen provides visual guidance to the waypoint on a

graphic highway display. The line down the center of the highway represents
your desired track, while a graphic indication of the distance and direction you
are off course is shown on a scale at the bottom right of the page (the selected
scale represents the distance from side to side). The arrow pointer below the
highway always points to the destination waypoint relative to the direction you
are moving.

30

The navigation page can be configured to show the
active waypoint, all route waypoints and/or nearby
waypoints on the graphic highway.

SECTION

4

NAVIGATION PAGE

Overview

Data

Fields

CDI

Scale

Graphic

Highway

Graphic

Compass

Pointer to
Waypoint

gps 130 7/23/98 9:21 AM Page 30

Advertising