Symbols, Intended use, Technical data – Bosch AQT 33-10 User Manual

Page 10

Advertising
background image

10 | English

F 016 L70 993 | (10.6.13)

Bosch Power Tools

 Vehicle tyres/tyre valves may only be cleaned from a mini-

mum distance of 30 cm, otherwise the vehicle tyre/tyre
valve could be damaged by the high-pressure jet. The first
indication of this is a discoloration of the tyre. Damaged
vehicle tyres/tyre valves can be extremely dangerous.

 Materials containing asbestos and other materials which

contain substances which are hazardous to your health
must not be sprayed.

 Detergents must not be used undiluted. The products are

safe to use as they contain no acids, alkalis or substances
which are detrimental to the environment. We recommend
that the detergents are kept out of the reach of children. If
detergent comes into contact with the eyes, wash immedi-
ately with plenty of water and if swallowed contact a doctor
immediately.

Never use the pressure washer without the filter or

with a dirty or damaged filter. Using the pressure washer
without a filter or with a dirty or damaged filter may invali-
date the warranty.

 Metal parts may become hot after prolonged usage, if nec-

essary wear protective gloves.

 Avoid high pressure washing in bad weather conditions es-

pecially when there is a risk of lightning.

Operation

 The operator must use the unit in accordance with the reg-

ulations. He/she must take local conditions into account
and be aware of other people, especially children, when
operating the unit.

 The unit may only be used by authorised persons who have

received training or have demonstrated their ability to op-
erate the unit. The unit must not be operated by children or
juveniles (danger of accidents due to incorrect use of the
unit). Children should be supervised to ensure that they do
not play with the appliance.

 This machine can be used by people with reduced physi-

cal, sensory or mental capabilities or lack of experience
and knowledge if they have been given supervision or in-
struction concerning use of the machine in a safe way and
understand the hazards involved.

 The unit must never be left unsupervised while the unit is

switched on.

 The water jet from the high-pressure nozzle produces a re-

coil on the gun. You should therefore hold the gun and
spray lance firmly with both hands.

Transport

 Switch off the motor and secure the unit before transport-

ing.

Maintenance

 Switch off the unit prior to all cleaning and maintenance

work and before replacing components. Pull out the mains
plug if the unit is mains-operated.

 Repairs may only be carried out by authorised Bosch Ser-

vice Centres.

Accessories and spare parts

 Only use accessories and spare parts which have been ap-

proved by Bosch. Original accessories and spare parts
guarantee that the unit can be operated safely and without
any breakdowns.

Symbols

The following symbols are important for reading and under-
standing the operating instructions. Please take note of the
symbols and their meaning. The correct interpretation of the
symbols will help you to use the machine in a better and safer
manner.

Intended Use

The product is intended for cleaning areas and objects out-
side the house, tools, vehicles and boats, if the appropriate
accessories such as cleaning agents approved by Bosch are
used.

Intended use is related to operation within 0°C and 40°C am-
bient temperature.

This product should not be used for professional use.

Technical Data

Symbol

Meaning

Movement direction

Weight

On

Off

Lo

Low pressure

Hi

High pressure

Accessories

Pressure washer

AQT 33-10

Article number

3 600 HA7 0..

Rated power

kW

1.3

Supply Temperature max.

°C

40

Supply rate min.

l/min

5.5

Allowable pressure

MPa

10

Rated pressure

MPa

6.7

Flow rate

l/min

4.5

Maximum inlet pressure

MPa

1

Autostop function

Weight according to
EPTA-Procedure 01/2003

kg

5.8

Starting cycles generate brief voltage drops. Interference with other
equipment/machines may occur in case of unfavourable mains system
conditions. Malfunctions are not to be expected for system impedances
below 0.153 ohm.

OBJ_BUCH-1870-004.book Page 10 Monday, June 10, 2013 10:08 AM

Advertising