Bosch GSS Professional 230 A - Manual (Page 13)

English | 13
Bosch Power Tools 1 619 929 J37 | (2.2.12)
16 Filter element (Microfilter System)*
17 Extraction adapter*
18 Vacuum hose*
19 Sanding sheet*
20 Perforating tool*
21 Screws for sanding plate
22 Sanding plate, thin, extended* 23 Sanding plate, extended*
24 Screws for extended sanding plate*
25 Triangular sanding sheet*
26 Triangular sanding plate, extended*
*Accessories shown or described are not part of the standard de-
livery scope of the product. A complete overview of accessories
can be found in our accessories program.
Technical Data
Noise/Vibration Information
Measured sound values determined according to EN 60745.
Typically the A-weighted sound pressure level of the product
is 76 dB(A). Uncertainty K=3 dB.
The noise level when working can exceed 80 dB(A).
Wear hearing protection!
Vibration total values a
h
(triax vector sum) and uncertainty K
determined according to EN 60745:
a
h
=4.5 m/s 2 , K=1.5 m/s 2 .
The vibration emission level given in this information sheet
has been measured in accordance with a standardised test
given in EN 60745 and may be used to compare one tool with
another. It may be used for a preliminary assessment of expo-
sure.
The declared vibration emission level represents the main ap-
plications of the tool. However if the tool is used for different
applications, with different accessories or poorly maintained,
the vibration emission may differ. This may significantly in-
crease the exposure level over the total working period.
An estimation of the level of exposure to vibration should also
take into account the times when the tool is switched off or
when it is running but not actually doing the job. This may sig-
nificantly reduce the exposure level over the total working pe-
riod.
Identify additional safety measures to protect the operator
from the effects of vibration such as: maintain the tool and the
accessories, keep hands warm, organise work patterns.
Declaration of Conformity
We declare under our sole responsibility that the product de-
scribed under “Technical Data” is in conformity with the fol-
lowing standards or standardization documents: EN 60745
according to the provisions of the directives 2011/65/EU,
2004/108/EC, 2006/42/EC.
Technical file (2006/42/EC) at:
Robert Bosch GmbH, PT/ETM9,
D-70745 Leinfelden-Echterdingen
Robert Bosch GmbH, Power Tools Division
D-70745 Leinfelden-Echterdingen
12.01.2012
Orbital sander GSS ... 230 A 230 AE 230 AE 280 A 280 AE 280 AE
Article number 0 601 ... 292 0.. 292 7.. 292 6.. 293 0.. 293 7.. 293 6..
Dust box included in delivery scope – – z – – z
Preselection of orbital stroke rate – z z – z z
Rated power input W 300 300 300 330 330 330
No-load speed
min -1 11000
5500
– 11000
5500
– 11000 11000
5500
– 11000
5500
– 11000
No-load orbital stroke rate
min -1 22000
11000
– 22000
11000
– 22000 22000
11000
– 22000
11000
– 22000
Orbit diameter mm 2.4 2.4 2.4 2.4 2.4 2.4
Sanding sheet dimensions
— Adhesion via Velcro backing
— Attachment via clamping
mm
mm
93 x 185
93 x 230
93 x 185
93 x 230
93 x 185
93 x 230
115 x 230
115 x 280
115 x 230
115 x 280
115 x 230
115 x 280
Sanding plate dimensions mm 92 x 182 92 x 182 92 x 182 114 x 226 114 x 226 114 x 226
Weight according to
EPTA-Procedure 01/2003 kg 2.3 2.3 2.3 2.6 2.6 2.6
Protection class /II /II /II /II /II /II
The values given are valid for a nominal voltage [U] of 230 V. For different voltages and models for specific countries, these values can vary.
Please observe the article number on the type plate of your machine. The trade names of the individual machines may vary.
Dr. Egbert Schneider
Senior Vice President
Engineering
Dr. Eckerhard Strötgen
Engineering Director
PT/ESI
OBJ_BUCH-426-005.book Page 13 Thursday, February 2, 2012 10:06 AM