Bosch GDB 2500 WE Professional - Manual (Page 15)

English | 15
Bosch Power Tools 1 609 929 W83 | (9.11.10)
Technical Data
Noise/Vibration Information
Measured sound values determined according
to EN 61029.
Typically the A-weighted noise levels of the
product are: Sound pressure level 89 dB(A);
Sound power level 100 dB(A). Uncertainty
K = 3 dB.
Wear hearing protection!
Vibration total values (triax vector sum) deter-
mined according to EN 61029:
Vibration emission value a
h
= 3 m/s 2 , Uncer-
tainty K = 1.5 m/s 2 .
The vibration emission level given in this infor-
mation sheet has been measured in accordance
with a standardised test given in EN 61029 and
may be used to compare one tool with another.
It may be used for a preliminary assessment of
exposure.
The declared vibration emission level repre-
sents the main applications of the tool. However
if the tool is used for different applications, with
different accessories or poorly maintained, the
vibration emission may differ. This may signifi-
cantly increase the exposure level over the total
working period.
An estimation of the level of exposure to vibra-
tion should also take into account the times
when the tool is switched off or when it is run-
ning but not actually doing the job. This may sig-
nificantly reduce the exposure level over the to-
tal working period.
Identify additional safety measures to protect
the operator from the effects of vibration such
as: maintain the tool and the accessories, keep
the hands warm, organisation of work patterns.
Declaration of Conformity
We declare under our sole responsibility that
the product described under “Technical Data” is
in conformity with the following standards or
standardization documents: EN 61029 accord-
ing to the provisions of the directives
2004/108/EC, 2006/42/EC.
Technical file at:
Robert Bosch GmbH, PT/ESC,
D-70745 Leinfelden-Echterdingen
Robert Bosch GmbH, Power Tools Division
D-70745 Leinfelden-Echterdingen
Leinfelden, 05.10.2010
Diamond Drill GDB 2500 WE
Professional
Article number 0 601 18P 7..
Rated power input W 2500
Output power W 1450
Rated speed n
0
– 1. Gear
– 2. Gear min -1
min -1
440
960
Drilling diameter
– optimum range
– possible range
mm
mm 82–132
32–212
Tool holder 1 1/4" UNC,
G 1/2"
Water supply
pressure (max.)
bar 6
Weight according to
EPTA-Procedure
01/2003
kg 11.8
Protection class /I
The values given are valid for a nominal voltage [U] of
230 V. For different voltages and models for specific
countries, these values can vary.
Please observe the article number on the type plate of
your machine. The trade names of the individual ma-
chines may vary.
Dr. Egbert Schneider
Senior Vice President
Engineering Dr. Eckerhard Strötgen
Head of Product
Certification
OBJ_BUCH-114-002.book Page 15 Tuesday, November 9, 2010 11:58 AM