Audiopipe APK-700.5 - Manual (Page 2)

1. INTRODUCTION
Congratulations and thank you for purchasing Audiopipe amplifiers, the logical choice
in mobile audio amplification. Audiopipe products have been designed and engineered
with the highest quality components and top of the line workmanship to help you reach
the superior sound you are after.
To achieve optimal performance of your system, please take a few moments to read over
this manual if needed before starting your installation.
2. DESIGN FEATURES
2-1. DIGITAL MONOBLOCK DESIGN FEATURES
3. SPECIFICATIONS
3-1. DIGITAL MONOBLOCK
1ohm stable digital monoblock amplifiers
Two amplifiers strappable to 2ohm
Frequency response : 10Hz ~ 270Hz
Signal to Noise Ratio : 95dB
Damping Factor : 200 <
Input sensitivity : 6V ~ 0.2V
Low pass filter : 35Hz ~ 250Hz @ 24dB / Oct
Subsonic filter : 10Hz ~ 50Hz @ 24dB / Oct
Bass Boost : 0 ~ 9dB @ 45Hz
Phase : 0 ~ 180 degree
1ohm stable Highly efficient and powerful digital monoblock.
Strappable 2 mono block amps to 2 ohm
High purity copper trace circuit boards.
0 gauge power / ground terminals
Hand-wound high grade power supply
24dB low pass and subsonic filter
The most safe protection circuits are applied to protect the amplifiers and audio systems.
* Thermal protection
* DC offset
* Speaker short protection
* Low & High battery voltage protection circuit
2ohm stereo or 4ohm mono stable full range amplifiers.
High purity copper trace and double sided circuit boards.
Hand-wound high grade power supply
12dB variable high pass, low pass filter and bass boost.
The most safe protection circuits are applied to protect the amplifiers and audio systems.
* Thermal protection , * DC offset, * Speaker short protection
2-2. FULL RANGE MULTI-CHANNELS DESIGN FEATURES