Audiopipe APK-700.5 - Manual (Page 3)

3-2. FULL RANGE MULTI-CHANNELS
2ohm stereo or 4ohm mono amplifiers
Frequency response : 20Hz ~ 20KHz
Signal to Noise Ratio : 105dB
Damping Factor : 200 <
Input sensitivity : 6V ~ 0.2V
High pass filter : 20Hz ~ 5KHz @ 12dB / Oct
Low pass filter : 50Hz ~ 5KHz @ 12dB / Oct
X-over : HPF / FULL / LP-BP ( Band-pass capable )
Bass Boost : 0 ~ 18dB @ 45Hz
Remote level control is included
MAX OUTPUT POWER
APK-250.2 : 2000Watts
APK-400.4 : 2500Watts
APK-700.5 : 3000Watts
4. CONTROLS & CONNECTIONS
4-1. DIGITAL MONOBLOCK
RCA INPUT & OUTPUT
RCA INPUT :
Connect preamp signal cables
from the source or the
headunit to RCA input
RCA OUTPUT :
Output RCA jack to another
amplifier.
POWER & PROTECT LED
Power LED :
Green-lit shows correct operation.
Protect LED :
Red-lit shows general malfunction,
faulty connection, thermal overload,
speaker short protection.
Master/slave connection ( Strappable to 2ohm )
Remote level control is included
0 gauge power & ground terminals.
Working Voltage : APK-2500 ( 8.5V~16V ), APK-3500, APK-4500 & APK-5000 ( 8.5V~18V )
External fuse rating ( strappable ) : APK-2500 : 200A ( 400A ) , APK-3500 : 350A ( 700A )
APK-4500 : 400A ( 800A ), APK-5500 : 450A ( 900A )
MAX OUTPUT POWER AT 1OHM.
APK-2500 : 2500Watts ( 2ohm strappable : 5000Watts )
APK-3500 : 3500Watts ( 2ohm strappable : 7000Watts )
APK-4500 : 4500Watts ( 2ohm strappable : 9000Watts )
APK-5500 : 5500Watts ( 2ohm strappable : 11000Watts )