Save these instructions for future refe- rence – ARIETE MVC2 Deluxe 4210 5 User Manual

Page 16

Advertising
background image

14

GB

• We recommend using tap water or alternatively, distilled water.
• CAUTION: DO NOT USE THE GLASS WIPER ATTACHMENT IF THE SURFACE TO BE CLEANED IS

COLD. Changes in temperature could cause it to break.

• The cleaner has been designed for domestic, not industrial use.
• This appliance must be used exclusively for the purpose for which it was designed and in the man-

ner indicated in the instructions for use. Any other use will be considered improper and therefore,
dangerous.
The manufacturer refuses to accept any liability for damages deriving from improper or incorrect use.

• The appliance complies with Electromagnetic Compatibility Directive 89/336/EEC.

SAVE THESE INSTRUCTIONS FOR FUTURE REFE-
RENCE

DIRECTIONS FOR USE
Filling the boiler tank before use.
Do not connect the power cord plug to the mains socket.
Unscrew safety cap (2) and, using funnel (26), pour into the tank
two measures (25) of water to the maximum level (fig. A). Screw
safety cap (2) back on again.
BEFORE UNSCREWING THE TANK CAP, ALWAYS ENSURE THAT THE CLEANER IS SWIT-
CHED OFF AND DISCONNECTED FROM THE POWER SUPPLY.

TURNING ON THE APPLIANCE
To turn on the appliance, insert the power cord plug into an elec-
trical socket and press ON/OFF switch (5); green indicator (4) and
amber indicator (3) will come on (fig.B). As soon as amber indica-
tor (3) goes out, the appliance is ready for use. Press button (22)
to supply steam. To prevent steam from being accidentally sup-
plied, move the safety slider (21) to the •• position.
Using the Steam Regulation (28) knob, it is possible to regulate the amount of steam. This means that
the appliance can be used on any type of surface or fabric.

FITTING ACCESSORIES
Detachable flexible tube

THE APPLIANCE ITSELF MUST BE SWITCHED OFF AND
UNPLUGGED FROM THE MAINS BEFORE THE FLEXIBLE PIPE
CAN BE INSERTED INTO OR REMOVED FROM THE INLET ON THE
APPLIANCE BODY. Before inserting the attachment of the flexible
pipe (24) into the inlet on the appliance body (6), open the hatch

Fig. A

Fig. B

Fig. C

2_interno_GB 3-06-2004 8:58 Pagina 14

Advertising