Xoro HSD 6000 - Manual (Page 131)

- - VIDEO SETUP PAGE - -
VIDEO DISPLAY
VIDEO TYPE
VIDEO OUTPUT
MAIN PAGE
NORMAL/PS
NORMAL/LB
WIDE
Lagerung von Cds
INITIAL SETTING
Video setup
There are three available items:
They are VIDEO DISPLAY, VIDEO TYPE, VIDEO
OUTPUT.
4:3 Pan & Scan video output for a
normal TV set
Letterbox video output for a
normal TV set
16:9 Wide Screen video output for a wide
screen TV set
Aspect ratios available for playback will be printed on the DVD disc rear packaging.
Some DVDs are recorded in the Cinema Wide format (16:9 aspect ratio), and some are recorded
in the standard format (4:3 aspect ratio). Some DVD discs are recorded in both formats and may
have the Pan Scan feature available. The Pan Scan feature if available will fill the entire screen in
4:3 TV screen. However, it will cut some of the picture off at the two sides.
The DVD player will choose the correct
system to display the playback of inserted disc.
The DVD player will output in NTSC format
regardless of what format the disc was designed for.
The DVD player will output in PAL format
regardless of what format the disc was designed for.
Press NTSC/PAL directly on the Remote Control to
alter NTSC, PAL or MULTI of TV System being played.
The VIDEO OUTPUT has five kinds of output ways:
S-VIDEO, SCART, Y/Cb/Cr, Y/Pb/Pr and VGA. If you are
using S-video output, please set this setting to “S-VIDEO”.
If you are using SCART output, please set this setting to
“SCART” and so on… which matches with your TV's input.
SCART video output, S-Video output, YUV output and
VGA output cannot be used simultaneously.
VIDEO DISPLAY
NORMAL/PS
NORMAL/LB 4:3
WIDE
VIDEO TYPE (TV System)
MULTI
NTSC
PAL
VIDEO OUTPUT
l
l
l
l
l
l
l
l
l
l
-
-
-
-
-
-
Note:
Note:
Note:
- - VIDEO SETUP PAGE - -
VIDEO DISPLAY
VIDEO TYPE
VIDEO OUTPUT
MAIN PAGE
MULTI
NTSC
PAL
- - VIDEO SETUP PAGE - -
VIDEO DISPLAY
VIDEO TYPE
VIDEO OUTPUT
MAIN PAGE
S-VIDEO
SCART
Y/Cb/Cr
Y/Pb/Pr
VGA
131