Rds ps function, Radio data system program service station name – Xoro HSD 6000 User Manual
Page 159
RDS PS FUNCTION
Radio Data System Program Service station name
The name of the RDS station now being received instead of the frequency will display on the VFD.
e.g.: BBC R3
In FM mode, press DISPLAY on the remote control to show DISPLAY PTY and conversion of RT,
FREQ, PS.
This function can be used under Tuner mode only.
Press the Key 6ch VOL on the remote control, TV OSD appears: (the last mode shown) e.g.:
Press 6ch VOL twice, OSD Appears:
Press 6ch VOL thrice to six times the OSD converts in turn of RF, LS, RS, CN and SW;
Press 6ch VOL continually it goes in cycle.
Press the Key VOL+ or VOL- on the remote control to change the Volume value of L F, RF, LS, RS, CN
or SW separately. e.g.
or in all of them,
You can adjust the Volume, as well, by turning the Volume knob in the front panel of the machine.
For a good reception the FM & AM antenna is required and that have to be put in an optimum
location when listening to broadcasting over the tuner.
N
:
N
:
ote
ots
l
l
l
AMP Volume up/down Adjustment
ALL
VOLUME
ALL
06
LF
VOLUME
Single
05
SW
VOLUME
Single
05
CN
VOLUME
Single
10
ALL
VOLUME
ALL
10
159