MAXWELL MW-3021 VT - Manual (Page 11)

ENGLISH
11
• Set the constant steam supply knob (4) to the
“0” position.
• Fill the water tank (13) till the “MAX” mark.
• Place the iron on its base (9).
• Insert the plug into the socket.
• Set the temperature control knob (11) to the
max. temperature, the pilot lamp (6) will light
up.
• When the soleplate temperature (14) reaches
the desired temperature value, the pilot lamp
(6) will go out, you can start cleaning.
• Unplug the unit.
• Hold the iron above the sink horizontally,
press and hold the self-clean button (12).
• Boiling water with scale will be released from
the iron soleplate (14) openings.
• Slightly swing the iron back and forth, until
water goes out of the water tank (13).
• Place the iron on the base (14) and let it cool
down completely.
• Once the soleplate (14) cools down com-
pletely, wipe it with a dry cloth.
• Before you take the iron away for storage,
make sure that there is no water in the water
tank (13) and that iron soleplate (14) is com-
pletely dry.
Cleaning and care
• Before cleaning the iron, make sure that it
is switched off and has cooled down com-
pletely.
• Wipe the unit body with a damp cloth and
then wipe dry.
• Scale on the iron soleplate can be removed
with a cloth soaked in vinegar-water solution.
• After removing scale, polish the soleplate
surface with a dry cloth.
• Do not use abrasive substances to clean the
soleplate and iron body.
• Avoid contact of iron soleplate with sharp
metal objects.
Storage
• Turn the temperature control knob (11) coun-
terclockwise to the “MIN” position, and the
constant steam supply knob to the “0” posi-
tion.
• Unplug the unit.
• Open the water inlet lid (2), turn over the iron
and drain any remaining water from the water
tank (13). Close the lid (2).
• Set the iron vertically and let it cool down
completely.
• Wind the power cord.
• Store the iron vertically in a dry cool place,
out of the reach of children.
Delivery set
Iron – 1 pc.
Beaker – 1 pc.
Instruction manual – 1 pc.
Technical specifications
Power supply: 220-240 V, ~ 50 Hz
Power consumption: 2000–2400 W
The manufacturer preserves the right to change
design and specifications of the unit without a
preliminary notification.
Unit operating life is 3 years
Guarantee
Details regarding guarantee conditions can
be obtained from the dealer from whom the
appliance was purchased. The bill of sale or
receipt must be produced when making any
claim under the terms of this guarantee.
This product conforms to the EMC-
Requirements as laid down by the
Council Directive 89/336/EEC and
to the Law Voltage Regulation (73/23
EEC)
MW-3021.indd 11 11.09.2012 14:13:30