EVS MulticamLSM Version 8.03 - Dec 2006 User's Manual - Manual (Page 150)

EVS MULTICAM - User’s Manual Version 8.03
EVS Broadcast Equipment SA – Dec 2006
148
Press LEFT key to take control of the left side of the screen, and recall
the desired clip for this side. Use the command knob to search inside the
clip until the desired picture is reached.
Press RIGHT key to take control of the right side of the screen, and
repeat the same operation with the clip you want to display on the right
side.
You can also shift horizontally the clips on both sides, so that the action
is in the center of the picture.
Press SHIFT key (D) to enter this mode. The menu will change, as shown
above.
Press Å LF Æ key, and move the command knob to center the left side
picture.
Press Å RG Æ and do the same operation for the right side picture.
To restore the default positions, press CLEAR + Å LF Ж, Е RG Æ.
Pressing Å WP Æ key allows moving the border. To restore the default
position of the border, press CLEAR + Å WP Æ.
To exit the SHIFT mode, press the SHIFT key (D) again.
If working in network mode, split screen can be performed on remote clips
as well as on local clips.