EVS MulticamLSM Version 8.03 - Dec 2006 User's Manual - Manual (Page 58)

EVS MULTICAM - User’s Manual Version 8.03
EVS Broadcast Equipment SA – Dec 2006
56
9. Multi
PGM mode
1/2/3 PGM modes
(press A or B from
MAIN menu)
The MULTICAM has two modes for its basic operation, 1 PRV/PGM mode
or Multi PGM mode:
ƒ The 1PGM+PRV mode, as described previously, is the more
powerful of the two, allowing for interaction between all outputs.
Here, synchronized replays can be rolled and chained between
the cameras with either a mix, wipe, or cut between them.
ƒ The MULTI PGM mode is more basic, which gives the operator
independent control of all outputs.
In this mode, all outputs can be controlled together (such as jogging back
to a certain action, with all outputs) or they can be controlled individually
(either PGM 1, 2 or 3).
The secondary menu can be called by pressing the MENU key and is
similar to the 1PGM+PRV mode, except that the A function is empty since
it is not possible to create a transition between the channels in this mode.
Please refer to Chapter 8 for description of the other functions of the
secondary menu.
The functions available from the primary menu in Multi PGM mode are :
Rst Cam: This function restores the position of cameras on the active
channels: CAM A on PGM1, CAM B on PGM2,…
P G M 1 C A M A * P G M 2 * C A M B P G M 3 C A M C
A u d . M e t . P g m S p d S o r t - > T C P o s t R o l l
S w t o I N S e a r c h P r e f
P . 1 B . 1 C l i p s : L O C A L R e c o r d s : L O C A L
P L 1 1 : <
M s g :
R s t C a m L o c a l S y n c T o 2 n d C T R L
P G M 1
P G M 2 P G M 3 T O G G L E