EVS MulticamLSM Version 10.04 - January 2011 Operating Manual - Manual (Page 178)

Issue
10.04.A
EVS Multicam Version 10.04 – Operating Manual
EVS Broadcast Equipment SA – January 2011
168
16. Offside Line Mode
16.1 INTRODUCTION
16.1.1 D
EFINITION AND
L
ICENSE
C
ODE
Note
The internal offside line mode is a software option, which requires the
license code 114 being installed. For more information on the required
license key, contact the Support or Sales team.
The internal offside line mode is not available on EVS servers working
with 10-bit codecs.
The internal Offside Line mode makes it possible to make the offside line visible
on the screen by shading a portion the pitch. You can use this feature on clips or
trains loaded on the PGM1. This effect can then be recorded in the loop of the
server and reinserted in the feed of a recorder channel.
The external Offside Line mode offers a more advanced offside line feature, as
well as other live tools, when the EVS server is used in combination with the Epsio
application. For more information, refer to the Epsio user manual.
16.1.2 A
CTIVATING THE
O
FFSIDE
L
INE
M
ODE
To activate the offside line mode, you need to set as follows the parameters on
page 9.2 of the Setup menu on the Remote Panel:
The Offside Line setting (F2) has to be set to ‘Yes’.
The External Offside setting (F3) has to be set to ‘No’.
When you activate the offside line, you can no longer use a second controller.
16.1.3 A
CCESSING THE
O
FFSIDE
L
INE
M
ODE
When the offside line mode is active, the Offside Line option is available from the
operational menu in the PGM/PRV or Multi PGM mode:
Rst Cam Local Sync Prv OFFSIDE
Cam A Cam B
You access this mode by pressing the SHIFT+D key.