2 how to assign a keyword to a clip, 3 how to clear a keyword with the keyboard, 4 how to clear a keyword with the stylus – EVS MulticamLSM Version 10.04 - January 2011 Operating Manual User Manual
Page 87: How to assign a keyword to a clip, How to clear a keyword with the keyboard, How to clear a keyword with the stylus
EVS Multicam Version 10.04 – Operating Manual
EVS Broadcast Equipment SA – January 2011
Issue
10.04.A
77
10.2.2 H
OW TO
A
SSIGN A
K
EYWORD TO A
C
LIP
Move the cursor to the desired keyword and press ENTER, or click on the keyword
with the stylus. The keyword will be assigned to the first available k eyword
location on the last line of the screen. Repeat this to assign more keywords (up to
3) to the current clip.
Depending on the CLIP/CAM mode, the keywords will be assigned to the current
camera angle only (CAM mode), or to all camera angles of the current clip (CLIP
mode).
If 3 keywords are already assigned to the clip, the operator has to clear some of
them to be able to assign new keywords.
10.2.3 H
OW TO
C
LEAR A
K
EYWORD WITH THE
K
EYBOARD
Press <TAB> to move the arrow cursor to the lower area of the screen. Red
arrows will appear around one of the keywords or ranking values. Use the ←/→
arrows to select the keyword to remove, and press CTRL+DEL. Press the <TAB>
key again to move the arrow cursor back to the keywords list.
10.2.4 H
OW TO
C
LEAR A
K
EYWORD WITH THE
S
TYLUS
Click on the keyword to remove on the last line, the click on the CTRL+DEL:CLR
KWD area on the screen, or press CTRL+DEL.
10.2.5 H
OW TO
E
DIT THE
R
ANKING OF THE
C
URRENT
C
LIP
W
ITH
THE
K
EYBOARD
Press the <TAB> key to move the cursor to the lower area of the screen Use the
←/→ arrows to select the desired ranking, and press ENTER. The selected
ranking is highlighted in green.
10.2.6 H
OW TO
E
DIT THE
R
ANKING OF THE
C
URRENT
C
LIP
W
ITH
THE
S
TYLUS
Click on the desired ranking, it becomes highlighted in green.