EVS XEDIO CleanEdit Version 4.35 - August 2013 User Manual - Manual (Page 179)

Area Description
The table below describes the various parts of the Devices tab:
Part Name Description
1. Source
Device This area displays the plugged-in devices and the media that has
been automatically detected on the devices, as well as media from
drives and folders which have been scanned by the users.
See section "Source Device Area" on page 163.
2. Workspace This is the working area where you mainly perform the following
actions:
• Searching for the requested clips, potentially by applying search
filters.
• Loading, playing and editing the source clips to create sub-clips
that will be added to a storyboard.
See section "Workspace Area" on page 164.
9.2. Source Device Area
Introduction
When you open Xedio CleanEdit, the application automatically detects the plugged-in SD
or HD devices (CANON, P2, XDCAM or XDCAM EX supports), and searches for media
present on these supports.
USB devices and XF drives, containing media backed up from EVS video servers on an
event location, can be scanned, so their content is available for browsing, logging, rough-
cut and export.
General Description
The Source Device area displays:
• the identified devices as the root branches of an expandable tree view and the
detected media below the device on which it is stored. The path where the media is
located is specified.
USER MANUAL Xedio 4.35 Xedio CleanEdit
9. Editing in Place 163