7 transition effect settings, Transition effect settings, Ransition – EVS IPDirector Version 5.9 - January 2011 Part 8 User’s Manual User Manual
Page 171: Ffect, Ettings
IPDirector Version 5.9 – User Manual – Part 8: Editing - IPEdit
EVS Broadcast Equipment – January 2011
Issue 5.9.B
157
4.12.7 T
RANSITION
E
FFECT
S
ETTINGS
Transition Effect settings are available in the Tools > Settings menu, in the
category IPEdit > General, Transition Effects setting:
They allow you to:
•
define the default settings for the transition effects applied manually.
For more information on this, refer to section ‘How to Define Default Settings
for Manual Transition Effects’, on page 157.
•
define the settings for the transition effects applied automatically
For more information on this, refer to section ‘How to Add Effects
Automatically to New Elements’, on page 161.
H
OW TO
D
EFINE
D
EFAULT
S
ETTINGS FOR
M
ANUAL
T
RANSITION
E
FFECTS
1.
Open the menu Tools > Settings and select the category IPEdit > General.
2.
In the Transition Effects group box, select ‘Manual’ in the Mode drop-
down list.
Then specify the default values to be used for the transition effect
settings that will be applied manually:
•
effect type (mix or wipe)
•
effect duration in seconds and frames (even number, min. 2 frames)
•
effect position (before cut, centered, after cut)
3.
Click OK in the Timeline tab.
The following default settings will be defined for or applied to manual transition
effects in the following situations:
•
when you first open the Add/Modify Transition Effects window in a new session.
•
when you apply transition effects using keyboard shortcuts without modifying
the settings in the Add/Modify Transition Effects window in a new session.