EVS IPDirector Version 5.9 - January 2011 Part 8 User’s Manual - Manual (Page 20)

Issue 5.9.B IPDirector Version 5.9 – User Manual – Part 8: Editing - IPEdit
EVS Broadcast Equipment - January 2011
6
video transitions, or to the Replace feature.
1.5 ASSIGNING THE SHUTTLEPRO TO IPEDIT
The ShuttlePRO can be used to perform more rapidly many editing actions in
IPEdit. When the ShuttlePRO is physically connected and recognized by the
IPDirector hardware, it can be assigned to IPEdit as follows:
1. Press the Select Player key on the ShuttlePRO controller.
This calls up the list of play channels available to be controlled:
2. Rotate the jog dial to move through the available channel list and highlight
the channel you want to control.
If IPEdit is assigned to PGM1 and PGM2, you can select either PGM1 or
PGM2 on the ShuttlePRO.
3. Press the Select Player key again to confirm the channel selection and exit
the menu.
When the ShuttlePRO is assigned to IPEdit, the icon is displayed on the top
right corner of the Player panel.
To unassign the ShuttlePRO to IPEdit, apply the same procedure selecting ‘None’
in the list.