EVS MulticamLSM Version 9.00 - March 2008 User's Manual - Manual (Page 27)

EVS Multicam - User Manual Version 9.00
EVS Broadcast Equipment SA – March 2008
18
Record Trains p.2.3
[F1]Internal Loop Mode : Video+Audio
[F2]Make Clip rem. Trains : Ctrled Cams
[Menu]Quit [Clr+F_]Dft [F9]PgUp [F0]PgDn
4.6.13 I
NTERNAL
L
OOP
M
ODE
Possible values: Video + Audio (default) / Video only
This parameter defines which components of PGM1 output must be recorded
back into the server when the Loop mode is engaged.
• Video + Audio: Both video and audio signals of PGM1 are recorded
back into CAM A input.
• Video only: Only the video signal of PGM1 is recorded back into CAM A
input. This allows the operator to continue the record of live audio
tracks during the Loop process. This can be useful to add music, voice
or live sound to an edit for example.
Note
In audio embedded, the audio is always looped, whether the loop
mode is set to video + audio or video only.
4.6.14 M
AKE
C
LIP
R
EM
. T
RAINS
Possible values: Ctrled Cams (default) / All cams
This parameter allows clipping all cameras of a remote server if at least one
record train of that server is controlled.