Protocol-specific assignment rules, Standalone protocol, Protocol used in exclusive mode – EVS XT2 Version 11.01 - November 2012 Configuration Manual User Manual
Page 112
Protocol-Specific Assignment Rules
Standalone Protocol
The table shows whether or not the given protocol, used as a standalone (as main
controller, without secondary controller) can be assigned to the specified number of play
channels, record channels or play and record channel combinations.
The green cells refer to allowed assignments, the red ones to banned assignments.
Numbers in the cells refer to the notes mentioned below the table.
Remote
IPDP
AVSP
VDCP
Sony
EditRec
Odetics
DD35
Odetics
F&K
VDCP
F&K
LinX
1 PGM
2 PGM
2
> 2 PGM
1 REC
1
> 1 REC
1 PGM
+ 1 REC
Several PGM
+ 1 REC
Several PGM
+ Several REC
1. Every recorder
2. Only consecutive PGMs
Protocol Used in Exclusive Mode
The table shows whether or not the given protocol, used in exclusive mode (as a main
controller or secondary controller) can be assigned to the specified number of play
channels, record channels or play and record channel combinations.
The green cells refer to allowed assignments, the red ones to banned assignments.
Numbers in the cells refer to the notes mentioned below the table.
XT2+ Server - Version 11.01 - Configuration Manual
3. Multicam Configuration
102