EVS XT2 Version 11.01 - November 2012 Configuration Manual - Manual (Page 74)

IN6/OUT1 IN5/OUT2 IN4/OUT3 IN3/OUT4 IN2/OUT5 IN1/OUT6
#REC
SLSM
2x
#REC #PLAY
Prim.
Link Sec.
Link Prim.
Link Sec.
Link Prim.
Link Sec.
Link Prim.
Link Sec.
Link Prim.
Link Sec.
Link Prim.
Link Sec.
Link
1 1 2 PLAY
1 MIX
1 PLAY
2 MIX
2 REC
2 REC
1,2 REC
1,1
1 2 2 PLAY
1 MIX
1 PLAY
2 MIX
2 REC
3 REC
2 REC
1,2 REC
1,1
2 0 2 PLAY
1 MIX
1 PLAY
2 MIX
2 REC
2,2 REC
2,1 REC
1,2 REC
1,1
1 0 3 PLAY
1 MIX
1 PLAY
2 MIX
2 PLAY
3 MIX
3 REC
1,2 REC
1,1
1 1 3 PLAY
1 PLAY
2 PLAY
3 REC
2 REC
1,2 REC
1,1
1 0 4 PLAY1 PLAY
2 PLAY
3 PLAY
4 REC
1,2 REC
1,1
Example: 2xSLSM 2PH + 1 REC + 1 PLAY MIX
The BNC connectors to be used as record and play channels in an SLSM configuration
with 2xSLSM 2PH + 1REC + 1PLAY need to be cabled as shown below:
Available Configurations with 3G SLSM 2-Phase Cameras
Note
The 3G SLSM 2-Phase configurations are only available with an XT2+ server
equipped with V3X boards.
The table below shows the available 3G SLSM 2 Phase configurations in HD with an
XT2+ 6U server, and how the BNC connectors should be cabled:
XT2+ Server - Version 11.01 - Configuration Manual
3. Multicam Configuration 64