EVS MulticamLSM Version 10.03 - July 2010 Operating Manual - Manual (Page 71)

Issue
10.03.C EVS Multicam Version 10.01 – Operating Manual
EVS Broadcast Equipment SA – July 2010
62
9.3.13 M
OVING AND
C
OPYING
C
LIPS
Copying and moving clips in the VGA are performed using the CUT, COPY and
PASTE functions.
G
ENERAL
P
RINCIPLES
• If the clipboard was filled using the Cut function, the original clip(s) is/are
deleted after being pasted to the new location.
• In CAM mode, only the selected camera of the clip is Cut/Copied/Pasted. In
CLIP mode, all camera angles of the clip are Cut/Copied.
• For the Paste function in CLIP mode, only the available camera locations inside
the destination clip will be pasted. If some camera angles already exist for the
destination clip, these will not be overwritten by the corresponding camera in
the clipboard.
• A “Cut & Paste” of a clip is equivalent to a “Move Clip”, meaning that any
reference to that clip inside playlists will be updated to the new location of that
clip. This is not the case when doing a “Copy & Paste”, then deleting manually
the original clip.
C
LIPBOARD
F
IELD
This area displays the content of the clipboard: clip number, network number if the
copied clip/playlist is a remote clip/playlist, and the selected camera(s) for a clip.
The rest of the line summarize the available functions (copy, cut, paste, delete)
and their keyboard shortcuts. These functions can also be called by clicking on
the corresponding area on this line.
CTL+ X: CUT
This command is only applicable to clips.
1. Move the cursor to the clip to “cut” from the Clip screen
2. Press CTRL + X on the keyboard or click on the corresponding area on the
screen.
The clip removed from the current location and copied to the clipboard.
CTL+C: COPY
1. Move the cursor to the clip/playlist to copy
2. Press CTRL + C on the keyboard or click on the corresponding area on the
screen.
The clip is copied to the clipboard.