EVS IPDirector Version 6.2 - June 2013 PLAYLIST PANEL User Manual - Manual (Page 111)

How to Set Speed by Direct Entry in the Playlist Grid
To define speed by direct entry in the playlist grid, proceed as follows:
1. Select one element in the playlist and make sure that the Speed column is visible in
the grid.
2. To define the playout speed of the element, modify the value by direct entry in the
Speed column. A value as a percentage between 0 and 400% can be entered.
If the ESC key is used on the keyboard, the editable area is exited and the original cell
value is restored.
If the ENTER key is pressed or a different area is clicked on, the modifications will be
validated.
The selected speed value appears in the Speed column of the playlist grid.
6.3.4. Setting a Custom Speed for the On-Air
Element
Press the shortcut to set the speed of the on-air element, would it be playing or
paused.
Then enter a speed value in the Set Speed window:
The element will then play at the selected speed.
This is a temporary setting. It will be only used once.
6.4. Stopping and/or Starting
Automatically the Playout of a Playlist
6.4.1. Purpose
The purpose of the still/start mode option for elements in a playlist is to give more
flexibility in the playout of a playlist. It allows automatic starts or freezes within a list. It
enables external triggers to start the list and elements to be played at a predetermined
time.
IPDirector - Version 6.2 - User Manual - Playlist Panel
6. Playout Effects and Parameters 97