EVS XSnano Version 11.02 - July 2012 Configuration Manual - Manual (Page 88)

Inputs
Description Number of logical record channels in the given configuration.
The partition of the disk storage between these channels, and
the advanced audio settings are automatically adapted to the
number of record channels.
Values The number of supported channels depends on the chassis,
and the mode:
• On XSnano: 0-4 (all config.)
See section "General Information on Supported
Configurations" on page 52 for more information on number of
record channels and on supported configurations.
Outputs
Description Number of logical play channels in the given configuration.
Values • On XSnano: 0-4 (all config.)
See section "General Information on Supported
Configurations" on page 52 for more information on number of
record channels and on supported configurations.
Base Config.
Description Mode the EVS server is working in.
The base configurations available depend on the server type,
and on the valid license codes.
Values • Server:
mode where the EVS server can be controlled by one or
more of the following protocols: Sony BVW75, VDCP,
Odetics, DD35, but not from the Multicam production
screens.
• XSense :
mode where the EVS server can be controlled by the
XSense Remote Panel, or from the Multicam production
screens.
Default value Server
80 3. Multicam Configuration
EVS Broadcast Equipment S.A. Issue 11.02.A July 2013