EVS XTnano Version 11.02 - July 2013 Configuration Manual - Manual (Page 176)

Playlist auto fill
Description Specifies which camera angles will be added to the playlists
when using the Fill Playlist (F9) function from the main menu
of the Remote Panel.
Values The following values are possible:
• All Cam:
The clips for all camera angles will be added to the playlist.
• Prim+Sec:
The clips corresponding to the primary and secondary
camera angles will be added to the playlist.
• Primary:
The clips corresponding to the primary camera angles will
be added to the playlist.
• Secondary:
The clips corresponding to the secondary camera angles
will be added to the playlist.
• Cam A, Cam B, Cam C, Cam D
The clips corresponding to the defined camera angle will be
added to the playlist.
Default value All Cam
Fade to/from color
Description Specifies the color that is used in the transition effects ‘fade to
color’, ‘fade from color’ and ‘fade to/from color’ (V fade).
Values Black / White
Default value Black
Load Playlist
Description This parameter is only used in 2PGM or 3PGM mode.
Values The following values are available:
• Always:
This always loads the selected playlist in PGM/PRV mode.
• Conditional:
This loads the selected playlist on the selected PGM only if
only 1 channel is active when entering the Playlist Edit
mode. It allows loading and playing multiple playlists using
a single Remote Panel.
Default Value Always
168 3. Multicam Configuration
EVS Broadcast Equipment S.A. Issue 11.02.A July 2013