EVS XTnano Version 11.02 - July 2013 Configuration Manual - Manual (Page 186)

Recall clip toggle
Description Enables/disables the selection of the camera of a clip through
the Function keys: Pressing several times the F_ key browses
to CAM A, CAM B, CAM C, CAM D, CAM E and CAM F.
Values Yes / No
Default value Yes
Record key
Description Changes the function of the RECORD key on the Remote
Panel, as described below.
Values The following values are possible:
• Start REC+Live:
Pressing the RECORD key starts the record process and
switches to LIVE mode.
• Live:
Pressing the RECORD key only switches to last recorded
picture, but the record is not restarted if it has been
previously stopped by the operator.
Default value Start REC+Live
VGA & Remote sync
Description Specifies whether and how the current clips machine, page and
bank of VGA screens and Remote Panel must be
synchronized.
Values The following values are possible:
• No:
Clip machine, page and bank can be selected
independently on the VGA screen and on the Remote
Panel.
• Yes:
Clip machine, page and bank are synchronized between
VGA screen and Remote Panel. Connecting to the clips of
a network machine or coming back to the clips of the local
machine, or selecting a new page or bank on one side will
be automatically reflected on the other.
• Server:
Clip pages and banks can be selected independently on
VGA and Remote Panel, but connecting to the clips of a
network machine or coming back to the clips of the local
machine on the VGA or Remote Panel will be automatically
reflected on the other.
Default value No
178 3. Multicam Configuration
EVS Broadcast Equipment S.A. Issue 11.02.A July 2013