Hafele EN 372.64 Series - Manual (Page 2)

2
Foreword
By choosing the senso lift-up fitting, you have opted for a fitting solution that is technically very advanced and mechanically very
efficient. Your senso is manufactured with extreme care and precision and goes through numerous quality and safety checks
in order to ensure that it operates smoothly and safely.
1. IMPORTANT SAFETY NOTICE
The installation must be carried out in accordance with the assembly instructions; otherwise there is a risk of
injury.
2. The present senso lift-up fitting is only suitable for the intended use as a folding lid support for living room, bath, kitchen and
office furniture according to the weight printed on the fitting. Any use that falls outside this is regarded as not being an
agreed use.The manufacturer is not responsible for any losses or damage resulting from other uses.
3. The observance of the operating instructions as prescribed by the manufacturer also form part of the agreed use.
4. Also take into account the general legal and miscellaneous regulations and legal provisions that are applicable – even
those that apply in the operator’s country – as well as the applicable environmental protection regulations. The regulations
of the trade associations or other supervisory authorities that are in force locally must always be observed.
5. The manufacturer cannot be held responsible for any losses or damage resulting from unauthorised modifications to the
senso.
IMPORTANT SAFETY NOTICE
The metal frame and the used gas suspension resp. damping elements of the fixture must not be opened under
any circumstances, as the internal components are under a lot of tension and there is a risk of injury.
Provided the above guidelines are adhered to, you will enjoy many years of satisfaction from your senso lift-up fitting.
For any further questions please do not hesitate to contact us.