Hafele EN 372.64 Series - Manual (Page 6)

6
Inside edge of
side wall
Upper edge of base
64 64 32
4
1
4
1
4
1
4
1
)*
2
16 16
32
16 16
20
0
2
R
0
2
R
5 5
Ш5 Ш5
Advice: Drill holes in the flap frame. Dimensions from the upper edge of the base or
the inside edge of the side wall.
View of central hinge joint on the
reverse side of the flap frame.
View of flap supports on the
reverse side of the flap frame.
1.5
For a flap width of 900 mm upwards
we recommend 3 central hinge joints.
Number of drilled holes and
drilling diagram for hinge joint as
per manufacturer’s specification.
*) = in case of adjustable central hinge joints 2-4 mm
Customer-specific depending on the
screws selected recommended:
M4 screws or rivets with Da = 4 mm.
)*
2
3
Drill holes for the cabinet flap which comes in 2 parts
according to the drilling diagram.
Suitable for 20 mm aluminum frame profile.