Herman Miller Embody Chairs - Disassembly For Recycling - Manual (Page 5)

Z
© 2012 Herman Miller, Inc. Zeeland, Michigan. Printed in the U.S.A.
® Y, Z, Embody, Co/Struc and Mirra are among the registered trademarks of Herman Miller, Inc.
TM Sense, Setu, Tu and SAYL are among the trademarks of Herman Miller, Inc.
Illustrations and specifications are based on the latest product information available at the time of publication.
The right is reserved to make changes in design and specifications at any time, without notice, and also to discontinue products. 5
Part no. 1b9vtc rev A.
18. Remove the two top
antler attachment screws
using a T-27 torx wrench.
16. Remove hinge covers.
17. Pull out pivot pin.
15. Using T-27 torx wrench,
remove both spine cap
screws.