High Lifter Lift Kit for Polaris 550 - Signature Series - Manual (Page 8)

14) Insert the new bushings, sleeves, and caps into the new High Lifter lower control arms.
Note: Placing some grease on the bushing and sleeves. This makes the installation easier.
15) When the bushing and sleeves are in place connect the new lower control arms to the frame using the
stock hardware. Connect the lower shock to the new control arm by using the 10x55mm bolt and
10mm nut.
NOTE: Connect the stabilizer bar to the new lower control arm. (Remember you remove the stabilizer
bar on 2009 models, so this step does not apply if you have this year model)
16) Using the zip ties provided in the kit, fasten the brake lines to the lower control arms.
17) Once you have installed the control arms, connected the shock and hub assembly, place the wheels
back on the ATV. Torque all lugs to factory specifications and lower the jack.