High Lifter Lift Kit for Yamaha Grizzly 450i (07-12) User Manual

Lift kit installation instructions, Yamaha 450i grizzly

Advertising
background image

1

High Lifter Products, Inc.

318-524-2270

780 N Professional Drive

FAX 318-524-2297

Shreveport, LA 71105

Yamaha 450i Grizzly

Lift Kit Installation Instructions


Read Before Installation
This product is designed for use on ATVs and/or RUVs to increase ground clearance and fender
clearance. It is designed for utility type, slow-speed use on relatively flat terrain in deep mud or
snow. Although we have many thousands of satisfied lift kit customers and over 1,800 franchised
dealers selling and installing lift kits, purchasers should be aware that use of this product may
increase the frequency of required maintenance, part wear, and will raise the center of gravity on
your ATV and/or RUV, increasing risk of roll-over, injury and death on all types of terrain. It is
your responsibility to always inform other operators and passengers of this vehicle about the added
risks.

We recommend that wider tires and/or wheel spacers be used to achieve a wider stance and to
improve stability of the ATV and/or RUV. Riders should be advised that the handling
characteristics of a taller ATV and/or RUV are different and require extra care when riding,
particularly on side hills or off-camber situations. If you further raise the center of gravity by
adding taller tires, heavy loads to racks or seats, or by any other means, the ATV and/or RUV must
be operated with even more care, at slower speeds and on relatively flat ground. All turns should be
done at a slow speed, even on level ground.

Operation of an ATV and/or RUV with or without a lift kit, while or shortly after consuming
alcohol or drugs, subjects the rider to the risk of serious bodily harm or possible death. This risk is
compounded if the rider does not wear an approved helmet and other safety gear. High Lifter urges
that all approved safety gear be worn when riding an ATV and/or RUV as a driver or passenger.

If this product is not what you expected, or is not consistent with your intended use, you should
return the product immediately to the seller, before installation, for a refund of the purchase price;
less any fees. After installation, product is warranted for 90 days for defects in workmanship and
materials. Warranty is limited to refund of the purchase price or replacement of the kit, at the
seller’s option.

Dealers and other Installers
You are responsible for informing your customer and end user of the information contained above
and the increased potential hazards of operating an ATV and/or RUV equipped with a lift kit. If
you install the lift kit, it is your responsibility to also install the warning label prominently in view of
the driver and in prominent view of the driver and passenger on RUVs and multi-passenger ATVs.
They should also be instructed to notify anyone operating the vehicle, as well as any passengers, that
a lift kit is installed.

As discussed above, it is critically important that they be instructed in the need for slower speed
operation, regardless of terrain, after this lift kit is installed.

Advertising