High Lifter Lift Kit for Yamaha Grizzly 450i (07-12) - Manual (Page 4)

4
5) Connect the Front lift tube bracket to the frame using the 10mm x 60mm Hex bolts and 10mm lock
nuts.
6) Next, insert the bottom of the shock into the top of the tube bracket. Place the small spacer tot the
inside of the tube bracket next to the shock.
7) Insert the 10mm x 60mm hex bolt through the support bracket and then through the tube bracket,
spacer and shock until it goes all the way through. Secure it using the 10mm lock nut
8) Connect the support bracket to the A-arm using the two smaller support bracket and 6mm x 40mm hex
bolts and 6mm lock nuts.