High Lifter Lift Kit for Honda Recon 250 (97-08) User Manual
Page 3
Advertising
5) Slide bottom of shock into top of lift bracket. Insert the small spacer between the shock and the
bracket. Secure the shock using 10x60 Hex bolt and 10mm Locknut.
6) Re-install top of shock in original location, using OEM hardware.
NOTE: Installing the top of the shock will be difficult and may require compressing the shock.
7) Repeat the procedure for the other side.
8) Make sure all bolts are tightening to manufacturer’s torque specifications.
9) Install the wheels, torque wheel lug nuts to manufacturer’s specifications, lower and remove jack.
Check for clearance problems or misalignment.
Advertising