High Lifter Lift Kit for Honda Recon 250 (97-08) - Manual (Page 5)

5) Insert the two Rear Flat Brackets and the Medium Spacer on the shock mount. Placing the Flat
Brackets on the outside of the shock mount tabs and the spacer in the center of the tabs. Secure it with
the OEM bolt and nut.
6) Now attach the shock to the Flat Brackets and the differential support bracket. Using the 10x60 hex
bolt and 10mm Locknut.
7) Tighten all bolts to manufacturer’s torque specifications.
8) Install the wheels, torque wheel lug nuts to manufacturer’s specifications, lower and remove jack.
Check for clearance problems or misalignment.