English – MAXWELL MW-3017 BK User Manual

Page 6

Advertising
background image

ENGLISH

6

Set the steam supply control

(5) to the

«off»

position.
Fill the water tank (12) till the MAX mark.

Put the iron on the base.

Insert the power plug into the outlet

.

Set the temperature control (9) to the max.

temperature

of the iron sole MAX, the (10)

indicator will light up.
When the sole temperature (14) reaches the

desired temperature value, the (10) indica-
tor will go out, you can start cleaning of the
iron chamber.
Unplug the iron

.

Hold the iron above the sink horizontally;

press the “SelfClean” (11) button.
Boiling water together with scale will be

throwing out from the openings in the iron
sole (14).
Slightly sway the iron back and forth, until

water goes out of the water tank (12).
Place the iron on the base and let it cool

down completely.
When the sole (14) cools down completely,

wipe it with a dry cloth.
Before you take the iron for storing, make sure

that there is no water in the water tank (12) and
that the iron sole (14) is completely dry.

Cleaning and care

Before cleaning the iron, make sure that it is

turned off and has cooled completely.
Wipe the iron’s outer surface with a damp

cloth and then wipe dry.
Sediment on the iron sole can be removed

with a cloth dampened in vinegar-water so-
lution.
After removing sediment, polish the sole

with a dry cloth.
Do not use abrasive substances to clean the

sole and body of the iron.
Avoid touching the iron sole with sharp met-

al objects.

Storage

Turn the temperature control (9) anticlock-

wise to the “MIN” position, and the constant
steam supply control (5) to the “off” posi-
tion.
Remove the plug from the socket.

Open the water tank lid (2), turn over the

iron and d

rain any remaining water from the

water tank

(12). Close the lid (2).

Set the iron vertically and allow it to cool

completely.
Wind the power cord.

Keep the unit vertically in a dry cool place,

out of reach of children.

Delivery set

Iron– 1 pc.
Water tank – 1 pc.

Specifications
Power supply: 220-240 V

~ 50 Hz

Maximal power consumption: 1800-2200 W

Service life of the unit is 3 years

The manufacturer preserves the right to change
the design and technical specifications of the unit
without a preliminary notification.

GUARANTEE
Details regarding guarantee conditions can be
obtained from the dealer from whom the appli-
ance was purchased. The bill of sale or receipt
must be produced when making any claim under
the terms of this guarantee.

This product conforms to the EMC-
Requirements as laid down by the
Council Directive 89/336/EEC and to the
Low Voltage Regulation (73/23 EEC)

MW-3017_INSTR.indd 6

MW-3017_INSTR.indd 6

29.06.2011 9:46:00

29.06.2011 9:46:00

Advertising