High Lifter Lift Kit for Polaris 800 Ranger RZR & RZR 800 "50" - Manual

1
High Lifter Products, Inc.
(318) 524-2270
780 N Professional Drive Fax (318) 524-2297
Shreveport, LA 71105
Polaris 800 Razor 01 Lift Kit
Lift Kit Installation Instructions
INSTALLATION NOTES FOR 2011 MODELS:
On 2011 models the customer MUST upgrade to a HLP rear axle bar replacement kit (ABK-P-3) or
upgrade the rear factory CV axles with HLP PRO SERIES axles or GORILLA axles!!! On 2011
models with a lift kit installed the rear axles bind when the suspension is at full extention/droop and
are subject to break.
Read Before Installation
This product is designed for use on ATVs and/or RUVs to increase ground clearance and fender
clearance. It is designed for utility type, slow-speed use on relatively flat terrain in deep mud or
snow. Although we have many thousands of satisfied lift kit customers and over 1,800 franchised
dealers selling and installing lift kits, purchasers should be aware that use of this product may
increase the frequency of required maintenance, part wear, and will raise the center of gravity on
your ATV and/or RUV, increasing risk of roll-over, injury and death on all types of terrain. It is
your responsibility to always inform other operators and passengers of this vehicle about the added
risks.
We recommend that wider tires and/or wheel spacers be used to achieve a wider stance and to
improve stability of the ATV and/or RUV. Riders should be advised that the handling
characteristics of a taller ATV and/or RUV are different and require extra care when riding,
particularly on side hills or off-camber situations. If you further raise the center of gravity by
adding taller tires, heavy loads to racks or seats, or by any other means, the ATV and/or RUV must
be operated with even more care, at slower speeds and on relatively flat ground. All turns should
be done at a slow speed, even on level ground.
Operation of an ATV and/or RUV with or without a lift kit, while or shortly after consuming
alcohol or drugs, subjects the rider to the risk of serious bodily harm or possible death. This risk is
compounded if the rider does not wear an approved helmet and other safety gear. High Lifter
urges that all approved safety gear be worn when riding an ATV and/or RUV as a driver or
passenger.
If this product is not what you expected, or is not consistent with your intended use, you should
return the product immediately to the seller, before installation, for a refund of the purchase price;
less any fees. After installation, product is warranted for 90 days for defects in workmanship and
materials. Warranty is limited to refund of the purchase price or replacement of the kit, at the
seller’s option.
Dealers and other Installers
You are responsible for informing your customer and end user of the information contained above
and the increased potential hazards of operating an ATV and/or RUV equipped with a lift kit. If