Front lift installation – High Lifter Lift Kit for Polaris 800 Ranger RZR & RZR 800 "50" User Manual
Page 3
Advertising
3
Front Lift Installation
1) Place ATV transmission in park. Place jack under center of ATV front end and lift until front wheels
clear the ground. Be careful to support ATV properly so that it is securely supported so that A-arms
and shocks can droop to full extension.
2) Remove front wheels.
3) Remove the bottom of the front shocks, stabilizer rod, and small spacer.
4) Place the front lift brackets onto the front shock mount. Make note of the angle on the bottom of the
brackets. The angle helps to clearance any welds on shock mount tabs.
Advertising