Hotchkis 20104 Chassis, Max Brace, 10-13 Camaro - Manual (Page 4)

2010 Chevy Camaro
Hotchkis Performance LLC.
4
6.
Once both sides are in, bolt on the center bridge plate using the provided
flange bolts. Install the 10mm flange bolt from the bottom up and make sure
to use the lock washer on the nut side.
NOTE: Do not completely tighten the bolts yet.
7. Once everything has been bolted on, begin tightening the bolts on the
outside main braces. Tighten M10 bolts to 50 ft-lbs and M12 bolts to 90 ft-
lbs.
BRIDGE PLATE