Hotchkis 80002 TVS System, Sport, 64-66, GM A-Body, Small Block - Manual (Page 36)

Rear Bar Installation
1. Look at the current sway bar installation.
2. Support the vehicle by the frame with lift jacks or jack stands, allowing the
suspension to be unsupported.
3. Remove the four bolts holding the sway bar to the trailing arms.
4. Remove the factory sway bar from the vehicle.
5. Place the new Hotchkis swaybar up to the trailing arms and push the bolts
through the sway bars.
6. Tighten up the new bar.
7. Double check that all fasteners are tightened.
Your installation is finished. Enjoy your new sway bars!