MSD 7531 Programmable Digital-7 Plus Installation - Manual (Page 5)

INSTALLATION INSTRUCTIONS 5
M S D
• W W W . M S D P E R F O R M A N C E . C O M • ( 9 1 5 ) 8 5 7 - 5 2 0 0 • F A X ( 9 1 5 ) 8 5 7 - 3 3 4 4
Save to MSD: This step will save any changes directly into the ignition. If you are only making
one or just a couple modifications this works well.
Save to PC: This will save your changes to only show on the PC screen (indicated by a red
bullet point next to any altered values). These modifications will not be active or saved until
you save the file or transfer the information to the MSD.
You can create numerous files on your PC and download them for testing purposes or by saving
programs you used at different races or test sessions.
BOOST
GAUGE
TACH
ICM
GEAR RETARD
CURVES
GEAR TRACES TIMING
MENU
TREE
NOTES
HISTORY FILES
HISTORY
ANALYZE
HISTORY TRACES
LAUNCH
REV LIMIT
BOOST CURVE
Figure 2 Pro-Data+ Screen and Program Windows.
MONITOR
PROGRAMMABLE FEATURES
The following explains the programmable features of the PN 7531 Ignition. The features are listed in the
same order that they show on the Data Editor list in the software. Note that all of the retard amounts are
cumulative and the maximum amount of retard is 30°. The gear curves are independent.
STATS
Stat 1: This is only used with the Hand Held Monitors, PN 7550, PN 7553.
ACQUIRED INFORMATION
IGNITION
MONITORED
LIST
SOFTWARE
VERSION