ARIETE Bon Cusine 180 User Manual

Page 9

Advertising
background image

EN

- 7 -

- Plug the appliance into the mains power and use the function select dial (H) to select the type of

cooking required:

top cooking (for gratin);

bottom cooking;

cooking at full power (top and bottom at the same time).

- Turn the dial of the thermostat (G) and set the required cooking temperature.
- Place the grill (C) or the drip pan (D) with the previously prepared foods inside the oven at the

cooking level (E) required (Fig. 2).

When cooking foods on the grill (C), also insert the drip pan (D) at a lower level (E) than the grill

(C) so as to collect any cooking fat (Fig. 3). We recommend pouring two glasses of water in the
drip pan (D) to prevent smoke, unpleasant odours and build up.

IMPORTANT: Place foods at a minimum distance of 2 cm from the top heating element.
- Use the dial (I) to set the timer for the required cooking time.
At this point, the oven will commence cooking and the On indicator light (L) will switch on: it

switches off when the set cooking time has stopped automatically or if the dial (I) is reset to “0”.

IMPORTANT: Keep an eye on the food while it is cooking.
- At the end of the cooking time, the oven will switch off automatically.
- Unplug the appliance from the mains power, open the door and to avoid the risk of burning your-

self, remove the grill (C) or the drip pan (D) with special oven gloves for the grill or the special fork
(M), provided, for the pan (Fig. 4).

CLEANING

ATTENTION:

NEVER PLACE THE APPLIANCE BODY, PLUG OR POWER CORD IN WATER OR

OTHER LIQUIDS; ALWAYS WIPE CLEAN WITH A DAMP CLOTH.
ATTENTION:

ALWAYS UNPLUG THE POWER CORD FROM THE ELECTRICITY MAINS BEFORE

FITTING OR REMOVING SINGLE ATTACHMENTS OR BEFORE CLEANING THE APPLIANCE.
- Frequent cleaning prevents the formation of smoke and unpleasant odours during cooking.
- The drip pan (D) and the grill (C) can be washed in warm soapy water or in the top rack of the

dishwasher.

- Always wipe the outside clean with a damp sponge.
Do not use abrasive products that can damage the paintwork.
- Never use products that might corrode aluminium (spray detergents) to clean the inside surfaces

and never scrape the sides with sharp or pointed objects. Wipe with a damp sponge at the end
of each use, when the oven has completely cooled.

IMPORTANT: All enamelled parts need to be washed with soapy water or other non-abrasive products.
- When there are grease spots or smoke exhalations, we recommend removing grease with a

sponge soaked in hot soapy water.

IMPORTANT: Dry with a soft cloth. Acidic substances such as lemon juice, tomato purée, vinegar
or similar can damage the enamel, making it lose shine.

Advertising