QNAP VS-2004L en - Manual (Page 170)

170
6.4 Device Configuration
Configure the SATA disk, RAID management tool, USB disk, and the UPS settings in this
section.
6.4.1 SATA Disk
This page shows the model, size and current status of the hard disk drive(s) installed on the
NVR. Other options include formatting the hard disks and viewing the status, and
scanning the hard drive bad blocks. When the hard disks are formatted, the NVR will
create the following default share folders:

record_nvr: The network share for saving regular recording files.

record_nvr_alarm: The network share for saving alarm recording files.

snapshot: The network share for saving snapshots.