QNAP VS-2004L en - Manual (Page 212)

212
6.7.2 SMSC Settings
Configure the SMSC (Short message service centre) settings to send the SMS text
messages to the particular mobile phone numbers when an event takes place on the NVR.
The default SMS service provider is Clickatell. Add an SMS service provider by selecting
‘Add SMS Provider’ from the drop-down menu.
When ‘Add SMS service provider’ is selected, enter the name of the SMS provider and the
URL template text.
Note:

Always follow the standard of the SMS service provider to receive the SMS properly.

Send a test SMS to verify the settings are correct.

When the ‘Advanced mode’ is in use in the ‘Alarm Settings’, this page will become
inactive. Go to ‘Camera Settings’ > ‘Alarm Settings’ > ‘Advanced Mode’ to edit the
SMS settings or select to use the ‘Traditional Mode’ and configure the SMS settings on
this page.