Renata SA 3V Lithium Coin Cells - DESIGNER'S GUIDE - Manual (Page 49)

48 49
the swiss power source
Application Worksheet
Please submit the information according to the following selection guide and send the application
worksheet back to your contact person.
Customer Information
Electrical Characteristics
Voltage: V max V Cut-off V min V
Continuous load: I max mA I min mA I average mA
Capacity C mAh
In case of pulse-loads, please define pulse parameters. Submitting your own detailed pulse scheme and
using your own pulse description is strongly encouraged for best clarity. Alternatively you can use the
following table of pulse parameters (defined according the scheme below):
«transmission»
(pulse-train)
I
time
I 3
t
1
t
2 t
3
I
2
I
1
Pulse scheme
You can add further explanation / info about your pulse profile here
t
1
: pulse duration
t
2
: pulse period
t
3
: time between two transmissions
Company:
Address:
Contact Person: Telephone:
Fax: E-Mail:
Basis-current ("stand-by" current) I1 mA Time-on (pulse duration) t1 ms
"Transmission" current I2 mA Pulse period t2 s
Peak current I3 mA Time between two transmissions t3 h
Pulse parameters