Shogun Motorsports Kawasaki ZX6R_RR (03-04) Frame Slider - Manual (Page 2)

4.
Using the 10 X 1.25 X 110 Bolt supplied in the kit: Use the 99-SP-750-4200-L Left Side Bell Type
Spacer Black Anodized
5.
The small end of the (99-SP-750-4200-L Left Side Bell Type Spacer Black Anodized) goes against
the left side of the frame. The longer of the two frame sliders goes on top of the spacer. Using
the 10 X 1.25 X 110 Socket Cap mount and torque down to OEM specs.
M
READ CAREFULLY
Shogun cannot guarantee that they will protect your motorcycle from any extent of damage.
Shogun frame sliders are really meant to help possibly save the frame from damage in the
event of a crash. Because Shogun frame slider products have been very successful in saving
cases, bodywork, levers and so on in the past, customers just assume sometimes you can put
the product on and no damage will happen. The fact is, some crashes result in little or no
damage to the motorcycle and some bikes are destroyed. It’s kind of like a bumper on a car
sometimes it works sometimes it doesn’t, it really depends on all the different forces applied
during the incident. We’ve seen bikes crash at 100 mph with little damage and some at 15
mph with major damage.