Removal / disassembly, Drive axle overhaul – Spicer Drive Axles Service Manual Single Axles 2-Speed & Double Reduction User Manual
Page 15
Advertising
Disassemble Wheel Differential
1. Remove nuts and bolts fastening ring
gear and support cases.
2. Remove small support case and thrust
washer.
3. Remove ring gear.
NOTE: A soft-faced hammer or mallet may
be required to dislodge gear from its
mounting.
4. To remove differential assembly, place
support case assembly on a bench or on
the floor. Position case on its side, then
slowly roll the case and slide differential
assembly out of the case.
.
15
REMOVAL / DISASSEMBLY
Drive Axle
Overhaul
Section
3
Advertising