Installation / assembly, Drive axle overhaul – Spicer Drive Axles Service Manual Single Axles 2-Speed & Double Reduction User Manual
Page 19
Advertising
Assemble Wheel Differential
3. Place thrust washer and side gear in
differential case (with pins).
4. Assemble side pinions and thrust
washers on spider. Place this assembly in
differential case.
5. Place side gear and thrust washer in
position on side pinions.
6. Align punch marks and place plain case
on case (with pins). Install cap screws and
torque (see chart back page).
IDLER PIN AND PINION
INSTALLATION
8. Place thrust washer in large support case.
NOTE: Turn side gear hub to check for free
differential rotation. Rotation may require
up to 50 ft.-lbs. (65
torque.
7. Install idler pins and pinions.
19
Section
3
INSTALLATION / ASSEMBLY
Drive Axle
Overhaul
Advertising