Troubleshooting tree, Solenoids – Spicer TPCS Troubleshooting Guide: Older Systems (ECU's w_Dual Connectors) User Manual
Page 31
Advertising
31
Each of the codes 7C! through 12C! matches one specific
solenoid. When the troubleshooting instructions refer to
connector test points, use Chart A to select the pin test point
for use with the particular fault code you are diagnosing. See
“Troubleshooting Tips” on page 20 for general guidelines on
system diagnostics.
Troubleshooting Tree
Code:
7C!, 8C!, 9C!, 10C!, 11C!, 12C!
Type:
Solenoids
7C = Steer
8C = Drive
9C = Trailer
10C = Supply
11C = Deflate
12C = Control
Advertising